User Manual

65
────────────────────────────────────────────────────
4.3 STATUS Settings (FFT)
────────────────────────────────────────────────────
4.3.12 Setting the FFT Analysis Mode
Flashing cursor
Function
display
Meaning
Function
display
Meaning
:
Stored waveform
:
Transfer function
:
Linear spectrum
:
Cross power spectrum
:
RMS spectrum
:
Cross correlation
function
:
Power spectrum
:
Impulse response
:
Auto correlation
function
:
Coherence function
:
Histogram
:
Octave analysis
Used to select the FFT calculation method.
Procedure Screen: STATUS, Waveform display
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
FFT Mode
item.
3. Use the function keys to make a setting.
For details on analysis, please refer to 4.8 FFT Analysis Function.