User Manual

57
────────────────────────────────────────────────────
4.3 STATUS Settings (FFT)
────────────────────────────────────────────────────
4.3.6 Setting the Peak Function
Function
display
Meaning
:
OFF
:
Peak value
:
Maximum value
, ---Data
Peak 1
Peak 2
Maximum value 1
4
2
5
3
6
, ---Data
Display the peak or maximum value of the input signal and analyzed results.
This is available only when the Format is set to Single or Dual display.
Screen: STATUS
Procedure 1. Press the
STATUS
key to display the screen to be displayed.
2. Move the flashing cursor to the
Peak
item.
3. Use the function key to make the selection.
Peak value display
When data at one point are higher than data
within the vicinity, the point is a peak. The 10
highest peaks are shown.
Maximum value display
Points with the 10 highest values are shown.