User Manual

44
────────────────────────────────────────────────────
3.6 Setting The Printer (Only When The 8994 PRINTER UNIT Is Installed)
────────────────────────────────────────────────────
3.6.2 Setting the Real-time Printing Function
Function
display
Meaning
:
Printing is disabled.
:
Printing is enabled.
NOTE
The input waveform (recorder waveform) is continuously printed in real
time.
Procedure Screen: PRINTER
1. Press the
SYSTEM
key to display the PRINTER screen.
2. Move the flashing cursor to the
Realtime Print
item.
3. Use the function keys to make a setting.
When the recorder's time axis is set to 200 ms/DIV or faster, the real-time
printing settings are automatically disabled. Further, when the time axis
range is set to a speed faster than 200 ms/DIV, Real-Time Printing is
automatically disabled.
While the printer always outputs the data at the measurement magnification
in recording mode, the waveform on the screen is reduced in size at the
ratio shown in the table below, depending on the time-axis range.
50 ms/DIV x 1/2, 20 ms/DIV x 1/5, 10 ms/DIV x 1/10
Setting a time axis range faster than 1 s/DIV may result in light printing.