User Manual

36
────────────────────────────────────────────────────
3.3 STATUS Settings (REC&MEM: STATUS Screen)
────────────────────────────────────────────────────
3.3.2 Setting the Time Axis Range
NOTE
10 ms 20 ms 50 ms 100 ms200 ms500 ms 1 s 2 s 5 s 10 s 30 s 1 min 2 min 5min 10 min 30 min 1 hour
10 µs
zzzzzzzzzzzzzz zzz
20 µs
zzzzzzzzzzzzzz zzz
50 µs
zzzzzzzzzzzzzz zzz
100 µs
zzzzzzzzzzzzzz zzz
200 µs
zzzzzzzzzzzzzz zzz
500 µs
zzzzzzzzzzzzzz zzz
1ms
zzzzzzzzzzzzzz zzz
2ms
zzzzzzzzzzzzzz zzz
5ms
- zzzzzzzzzzzz
z zzz
10 ms
- -
z z z z z z z z z z z z zzz
20 ms
- - -
z z z z z z z z z z z zzz
50 ms
- - - -
z z z z z z z z z z zzz
100 ms
- - - - -
z z z z z z z z z zzz
200 ms
- - - - - -
z z z z z z z z zzz
500 ms
- - - - - - -
z z z z z z z zzz
1s
- - - - - - - -
z z z z z z zzz
2s
- - - - - - - - - zz
z z z zzz
5s
- - - - - - - - - - z
z z z zzz
10 s
- - - - - - - - - - -
z z z zzz
30 s
- - - - - - - - - - - - z
z zzz
1min
- - - - - - - - - - - - -
z zzz
2min
- - - - - - - - - - - - - -
zzz
5min
- - - - - - - - - - - - - - - zz
Set the speed for inputting and storing the waveform of the input signal.
Time axis range setting expresses the time for 1 DIV. The sampling period is
1/100th of the set value for the time axis range. (100 samples/DIV)
The sampling period for the sampling recorder is set by the memory.
Screen: STATUS
Procedure 1 1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
Time/Div
item.
3. Move the flashing cursor to the time axis range for recorder or memory to
make the selection by using the Jog/Shuttle control, the function keys.
For the time axis range setting for the recorder, the
TIME/DIV
knob can be
also used.
Screen: Waveform display
Procedure 2 1. Press the
DISP
key to display the Waveform display screen.
2. Move the flashing cursor to
Function change
and select
REC&mem
(recorder
waveform) or
rec&MEM
(memory waveform) by using the
F4
function key.
3. Move the flashing cursor to the
time axis range
item.
4. Use the Jog/Shuttle control, the function keys, or
TIME/DIV
knob to make the
setting. The
TIME/DIV
knob can be used regardless of where the flashing
cursor is located.
The sampling period of the recorder is the same as that set for memory, so
depending on the memory sampling period, the time axis may not be
settable for the recorder.
When the time axis range for recorder is set to the fast range (greater than
200 ms/division), the real-time print setting is automatically off.
Combination of the recorder and memory time axis range.
Vertical axis: time axis range of memory waveform (/DIV), horizontal axis:
time axis range of recorder waveform (/DIV)