User Manual

32
────────────────────────────────────────────────────
3.2 Operation Sequence ( REC&MEM)
────────────────────────────────────────────────────
See Chapter 2
Settings on the STATUS screen
Press the
STATUS
key to display
the STATUS screen.
Preparation
Basic Settings
Advanced Settings
(Use this function, if necessary.)
Memory segmentation
See Chapter 6
Settings on the STATUS2 screen
Installation of the Instrument
Turn on the power
Connect the inputs
Function
Select the recorder and memory
function.
Time axis range
(Recorder/Memory
waveform setting)
Determine the speed with which
the input signal waveform is
captured.
Recording length
Determine the length of the data
sample for a single measurement.
Display function
Select the waveform data
(recorder/memory) on the
waveform display screen.
Display format
Select the format type for the
waveform display screen.
Additional recording
Set whether additional recording
is required.
See Section 3.3
Setting the printer
Setting the print
mode
Select the format, waveform, or
numerical value should be used
to output measured data and
calculation results.
Setting the print
mode
Select whether or not to print out
the waveform automatically after
it is captured.
See Section 3.6
Saving the file
Auto save function Select whether or not to save the
waveform automatically after it is
captured.
See
Section 3.7
3.2 Operation Sequence (REC&MEM)