User Manual

25
────────────────────────────────────────────────────
2.9 Loading Recording Paper (when the 8994 PRINTER UNIT is installed)
────────────────────────────────────────────────────
CAUTION
Always place the product in the head-up condition when it is to be
transported or stored for an extended period of time. If the product
is left idle for a long time with the head pressing on the roller, the
roller may be deformed, resulting in uneven printing.
NOTE
5. Align the edges of the recording paper you
pulled out of the printer with the edges of the
recording paper set into the holder.
If the edges of the recording paper are not
aligned exactly, the paper will come out crooked
when printing.
6. Raise the head up/down lever.
7. Pull the recording paper to the outside through
the printer exit slot in the stock cover.
8. Close the stock cover, and finish by tearing off
the recording paper against the edge of the
printer exit slot.
Make sure that the paper may jam if it is not aligned with the roller.
Printing is not possible if the recording paper is loaded wrong-side up.