User Manual

196
────────────────────────────────────────────────────
11.1 INTERFACE Screen (LAN Interface)
────────────────────────────────────────────────────
NOTE
Connection
Connect only when you have completed making the settings.
Connectingthisdevicetoanexistingnetwork.
Connect this devices LAN connector and the hub with a straight 10BASE-T
cable. Use a commonly sold straight 10BASE-T-compatible cable or a 9642
LAN CABLE, and connect it as illustrated below.
A cross cable is necessary when connecting this device and the PC one-to-
one (peer-to-peer). A standard 10BASE-T-compatible cross cable or a
straight cable + cross converter is required.
A straight cable cross-converter (9642 LAN CABLE accessory) can be used
with this instrument. Connect it as illustrated below.
Power for the 8855, and PC should be obtained from the same outlet.
Otherwise, potential difference between grounds may cause malfunctions.