User Manual

195
────────────────────────────────────────────────────
11.1 INTERFACE Screen (LAN Interface)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Data Collection Server
When communicating with this device, specify the IP address of the PC
running the 9333 LAN COMMUNICATOR. This is necessary when
collecting data using the 9333 LAN COMMUNICATOR.
If necessary, set "LAN" as storage media in the Save screen and as the
output destination for the PRINT key in the Printers screen.
When DNS is effective and the set IP address is other than 0.0.0.0, the set IP
address is used.
If the IP address is set to 0.0.0.0, DNS is used to search for the IP address.
For example, names are set in the following format: collect.hioki.co.jp. In
the case of this example, if ".hioki.co.jp" is omitted, DNS may not be able to
identify the IP address.
Delimiter Header ON/OFF Setting
Use this option when controlling the 8855 using communication commands.
Set whether headers are to be included in command responses, and whether
LF or CR/LF is to be used to start a new line. Either LF or CR/LF can be
used to send commands.
To send command, connect to the 8855*s 8802 (factory default) port using
TCP protocol, and send command character strings. For commands, see the
supplied FDD.