User Manual

188
────────────────────────────────────────────────────
10.6 Printing Procedure
────────────────────────────────────────────────────
10.6.3 Real Time Print
NOTE
The input waveform and data are printed out continuously in real time. (in
Recorder function)
Procedure
Screen: PRINTER (SYSTEM)
1. Press the
STATUS
key to display the Status
screen.
2. Move the flashing cursor to the
Realtime Print
item.
3. Use the function keys, and select
ON
.
4. When measurement starts, waveform appears on
screen and printout starts.
At a time axis range setting of 200 ms/DIV or faster, the waveform data will
be printed out later. (See Quick Start Section 12.3.)
While the printer always outputs the data at the measurement magnification
in recording mode, the waveform on the screen is reduced in size at the
ratio shown below, depending on the time-axis range.
REC: 50 ms/DIV x 1/2, 20 ms/DIV x 1/5, 10 ms/DIV x 1/10
Setting a time axis range faster than 1 s/DIV may result in light printing.