User Manual

187
────────────────────────────────────────────────────
10.6 Printing Procedure
────────────────────────────────────────────────────
10.6.2 Auto Print
Function
display
Meaning
:
Does not print automatically.
:
Prints using the internal printer.
:
Automatically transfers data to a device
connected through a LAN. This setting
requires that you have the 9333 LAN
COMMUNICATOR.
NOTE
Printout is carried out automatically after a waveform has been captured for
the specified recording length. (MEM)
Procedure
Screen: PRINTER (SYSTEM)
1. Press the
SYSTEM
key to display the Printer
screen.
2. Move the flashing cursor to the
Auto Print
item.
3. Use the function keys to make a setting.
.3.
4. Press the
START
key to start the measurement.
Printout is carried out automatically after a
waveform has been captured for the specified
recording length.
When cursors A and B are enabled in memory function, partial printing is
executed.
When the roll mode is enabled in memory function and the time-axis range
is lower than 10 ms/division, data is displayed and printed simultaneously.
When both auto-print and auto-save are enabled in the memory function,
auto-save usually takes precedence. However, if roll mode is enabled, auto-
print will execute first.