User Manual

180
────────────────────────────────────────────────────
10.3 Setting the CHANNEL Screen (printout)
────────────────────────────────────────────────────
10.3.1 Setting the Print Density
Flashing cursor
Flashing cursor
Function
display
Meaning
:
Selects light
:
Selects standard
:
Selects semi-dark
:
Selects dark
10.3.2 SCALING Screen
NOTE
10.3 Setting the CHANNEL Screen (printout)
If the data is to be output on the internal printer, any of four print densities
may be set for twelve waveform display colors. The set print density
determines waveform density on printouts or hard copies.
Procedure
Screen: ONE CH, LIST (CHANNEL)
1. Press the
CHAN
key to display the Various
channels (ONE CH) or List screen.
2. Move the flashing cursor to the
Wave_Disp
position.
3. Use the function keys to select density.
If the system is reset, print density returns to its
previous setting.
If the analog channel comment is set to
"SETTING" or "SET & COM," the analog
channel print density () is output during
printing.
The scaling function can be used to convert an output voltage from a sensor
or similar into a physical quantity.
Two types of scaling functions are available.
The gauge scale (maximum and minimum values of vertical axis) and A/B
cursor measurement values are displayed in the scaled units.
Scaling can be performed for every channel.
For details, see Section 5.3.