User Manual

176
────────────────────────────────────────────────────
10.1 Printout of Measurement Data Operating Procedure
────────────────────────────────────────────────────
Press the CHAN key to make the settings
on the CHANNEL screen.
Display format
Single Display and record as one graph.
(8 analog + 16 logic signals max.)
Dual Display and record as two graphs.
(8 analog + 16 logic signals max.)
Quad Display and record as four graphs.
(8 analog + 8 logic signals max.)
Oct Display and record as eight graphs.
(8 analog + 4 logic signals max.)
X-Y single X-Y waveforms of graphs 1 to 4 are displayed
and recorded in one screen. (memory and
recorder functions)
X-Y quad X-Y waveforms of graphs 1 to 4 are displayed
and recorded in four screen. (memory and
recorder functions)
Settings on the CHANNEL screen
Settings on the STATUS screen
Press the STATUS key to make the settings
on the STATUS screen.
Print density
The density of waveform data printing can be
set.
Waveform display graph position
The position of waveform data print can be set
when the display format has been set to screen
display excluding Single screen.
Scaling The printout will use the scaled gauge.
See Section 5.3.
Comment Two types of comments - title comments and
channel-by-channel comments - may be
superimposed on a graph. See Section 5.4.
10.1 Printout of Measurement Data Operating Procedure