User Manual

174
────────────────────────────────────────────────────
9.6 Editor Command Details
────────────────────────────────────────────────────
Function
display
Meaning
:
Store evaluation area in memory and quit
editor (See Quick Start Section 10.7)
:
Quit editor without storing evaluation area
in memory. The created area is discarded.
NOTE
clear
Clears a specified rectangular area of the editor screen.
1. Press this key.
2. Use the cursor keys to move the pencil mark to the start corner of the area
to be erased. Pressing speed up accelerates the movement of the mark.
3. Press the
F4
(
SET
)key.
4. Move the pencil mark to the end corner of the area to be erased.
5. Press the
F4
(
SET
) key again. The rectangular area is cleared.
Press the
F5
(
CANCEL
) key. Cancel the immediately preceding set point.
6. Press the
F6
(
exit
) key to terminate the clear area mode.
undo
Serves to undo the immediately preceding command.
Undo is applicable to all commands except save and end.
Press this key and clears the editor screen
end
Terminates the editor.
Press this key and select storing evaluation area in memory and quit editor
or quitting editor without storing evaluation area in memory.
If the end key is pressed without having done any editing or immediately
after using the store command, the editor is terminated without confirmation.
Press the
ESC
key to cancel. (The editor remains open.)