User Manual

171
────────────────────────────────────────────────────
9.3 Setting the Waveform Evaluation Mode
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Function
display
Meaning
:
Disable waveform evaluation.
:
Return NG if any part of the waveform
leaves the evaluation area.
:
Return NG if the entire waveform leaves
the evaluation area.
:
Enable waveform evaluation.
:
Activate editor for setting up evaluation
area.
Function
display
Meaning
:
Stop recording on GO result.
:
Stop recording on NG result.
:
Stop recording on GO or NG result.
9.3 Setting the Waveform Evaluation Mode
9.4 Setting the GO/NG Stop Mode
Procedure
Screen: STATUS
1. Move the flashing cursor to
Comparison
.
2. Make the setting with the function keys.
When waveform evaluation is enabled (OUT or ALL OUT is selected), the
"Stop mode" menu appears. Specify which evaluation option, GO or NG,
should be used to stop the recording.
The Auto Save and Auto Print functions are only executed when interruption
conditions are satisfied.
Procedure
Screen: STATUS
1. Move the flashing cursor to the position
Stop
Mode
.
2. Make the setting with the function keys.