User Manual

156
────────────────────────────────────────────────────
7.2 Waveform Calculation (MEM)
────────────────────────────────────────────────────
Select the calculating
data
Measurement end
Setting the calculating
range
Setting the items
Internal memory data
Waveform calculation
Loading from media
Displaying
calculation result
Operating the result
NOTE
Waveform processing of data in internal memory or media
Press the
FILE
key to display the FILE screen.
For details on LOAD, refer to Quick Start Section 10.8.
Waveform calculation execute the stored measurement data.
This setting calculates the measurement data between A and B
cursors. When there is no A and B cursors, calculates all data.
For details on setting, refer to Quick Start Section 8.2.
Press the
STATUS
key to display the wave calculation screen.
Move the flashing cursor to
wave calculation
. And use the
function key to select
F6
(
exec.
)key.
Displays "Calculating".
Displays waveform calculation result on the screen.
Printout can be carried out.
Saving can be carried out.
The maximum recording length allowing waveform processing calculation is
5,000 divisions (20,000 divisions for 128 M words, 80,000 divisions for 512
M words).
When using the trace cursor, the trace point value is displayed as processed
value.
The result can be recalculated by altering the calculation process.