User Manual

146
────────────────────────────────────────────────────
7.1 Numerical Calculation (MEM)
────────────────────────────────────────────────────
Setting the numerical
calculation
Executing the numerical
calculation
Setting the calculation
range
Displaying calculation
result
Internal memory data
Selecting the calculation
Loading from the media
Numerical evaluation
Processing the
calculation result
Numerical calculation end
NOTE
Calculation of data stored in memory
Press the
FILE
key to display the File screen.
Read the measurement data. See Quick Start Section 10.8.
The measurement data stored in memory of the instrument is
calculated.
The calculation range can be specified by the A and B cursors.
If the range is not specified, all measurement data is calculated.
For the A and B cursors, see Quick Start Section 8.2, "Using
the A/B Cursors."
Press the
STATUS
key to display the Numerical calculation
screen. Set the items. For details, see Section 7.1.1, "Making
Settings for Numerical Calculation."
Move the flashing cursor to
measurement
and
F6
(
exec.
)
key."measurement" is displayed.
The calculation result is displayed on the Waveform display
screen.
Depending on the results of the numerical calculation, a GO
(pass) or NG (fail) result is returned.
When the evaluation result is GO:
Outputs GO signal.
When the evaluation result is NG:
Outputs NG signal.
When a NG occurs, the numerical values of the channel that
experiences the error are displayed red on the screen. NG
channels are represented by an "x" on the printout.
Result to printer : ON Prints the evaluation results.
Result save : ON Saves the evaluation results.
Line cursor (horizontal) can not be set calculating ranges.
When only the cursor A is used, the waveform data from the position of
cursor A to the end of the data is calculated.
The result can be recalculated by altering the calculation process.