User Manual

144
────────────────────────────────────────────────────
7.1 Numerical Calculation (MEM)
────────────────────────────────────────────────────
NOTE
Evaluation result
Interpret the numerical calculation evaluation results by the color of the
numerical values. NG numerical values are red. Also, if a beeping sound has
been set, you hear the sound whenever a NG occurs.
When a NG occurs, the numerical values of the channel that experience the
error are displayed red on the screen. NG channels are represented by an "x"
on the printout.
The overall evaluation result is NG even if there is only one NG channel.
While all evaluation results appear on the Waveform display screen, the
evaluation results are printed out for each parameters in the print mode.
When the evaluation result is NG, an NG output signal can be obtained
between the NG terminal and the GND terminal. For details, please refer to
the Quick Start Section 11.1.6.
The numerical calculation is set to ON, the settings by using the
F9
(CH.SET) key are automatically set to OFF.