User Manual

138
────────────────────────────────────────────────────
7.1 Numerical Calculation (MEM)
────────────────────────────────────────────────────
Setting the measurement range
If you want to execute the numerical
evaluation
,y
ou have to set this items.
Numerical calculation settings
Setting the waveform
numerical calculation
Setting for numerical calculation
result printout
Setting for numerical calculation
result saving
Calculation channel settings
Setting the waveform numerical
evaluation
Executing the waveform
numericalcalculation
OFF
ON
OFF
ON
OFF
FD
PC
External MO
MO/HD
LAN
(1) Average
CH 1
CH8
OFF
ON
Upper value
Lower value
New data
Existin
g
data
Disable numerical calculation.
Enable numerical calculation.
Disable printout
Enable printout
Storing is disabled
Stored on floppy disk
Stored on PC card
Stored on external MO connected through SCSI
Stored on MO disk or hard disk
Saves on devices connected through LAN. This
requires the 9333 LAN COMMUNICATOR.
Up to four numerical calculations (No.1 - 16) can
be set simultaneously.
No calculation is performed for channels to
w
hich no module is connected, or for which the
display and recording function is disabled.
When the XY area is selected in the waveform
numerical calculation, specify the X-axis and
Y-axis channels.
Disable evaluation function
Return NG if result is outside specified range.
The numerical value can be set in a range of
-9.9999E+29 to +9.9999E+29.
Display the Waveform display screen and press
START key.
The waveform data captured is calculated.
Move the flashing cursor to the measurement
item, and press the F6 (exec.) key.
Calculate the existing waveform data between
the A and B cursors.
Evaluation GO/NG conditions
(19) Arithmetic processing
Numerical calculation Operating Sequence