User Manual
133
────────────────────────────────────────────────────
Chapter 6 Memory Segmentation Function
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Function
display
Meaning
:
Disable memory segmentation
:
Enable memory segmentation
Function
display
Meaning
:
Increases the recording length
:
Decreases the recording length
:
Select from fixed recording lengths
:
Freely set any recording length
32 M words
Recording
length (DIV)
Number of channels
8 4 2
0to40 1024 1024 1024
41 to 80 512 1024 1024
81 to 163 256 512 1024
164 to 327 128 256 512
328 to 655 64 128 256
656 to 1310 32 64 128
1311 to 2621 16 32 64
2622 to 5242 8 16 32
5243 to 10485 4 8 16
10486 to 20971 - 4 8
20872 to 40000 - - 4
(
Fixed recordin
g
len
g
th
)
128 M words
Recording
length (DIV)
Number of channel
8 4 2
0to63 1024 1024 1024
64 to 327 512 1024 1024
328 to 655 256 512 1024
656 to 1310 128 256 512
1311 to 2621 64 128 256
2622 to 5242 32 64 128
5243 to 10485 16 32 64
10486 to 20971 8 16 32
20972 to 41943 4 8 16
41944 to 83886 - 4 8
83887 to 167772
- - 4
(
Fixed recordin
g
len
g
th
)
512 M words
Recording length
(DIV)
Number of channel
8 4 2
0 to 655 1024 1024 1024
656 to 1310 512 1024 1024
1311 to 2621 256 512 1024
2622 to 5242 128 256 512
5243 to 10485 64 128 256
10486 to 20971 32 64 128
20972 to 41943 16 32 64
41944 to 83886 8 16 32
83887 to 167772 4 8 16
167773 to 335544
- 4 8
335545 to 671088
- - 4
(
Fixed recordin
g
len
g
th
)
Procedure
Screen: MEMORY DIV (STATUS)
(1) Select the Memory Segmentation
1. Press the
STATUS
key to display the Memory
segmentation (MEMORY DIV) screen.
2. Move the flashing cursor to the position shown
in the figure.
3. Use the function keys, and select
ON
.
(2) Set the Recording Length.
1. Move the flashing cursor to the
Shot
item.
2. Use the
JOG
control or the function keys to
make the selection.
When setting a recording length that the memory
cannot split on other screens, the memory
segmentation setting is automatically deactivated.
(See tables below.)
Maximum number of divisions
The recording length and maximum number of divisions are automatically
determined according to the set memory capacity and number of available
channels, as shown in the tables below. Refer to Quick Start 4.3.10.
A maximum of 512 segments when using the recorder & memory function.