User Manual

ManualsBrandsHIOKI ManualsTest & Measuring EquipmentMemory Recorder HIOKI HiCORDER 8855

141

142

143

144

145

146

147

148

149

150

121

────────────────────────────────────────────────────

5.11 Setting the 8954 VOLTAGE/TEMP UNIT

────────────────────────────────────────────────────

WARNING

A common GND is used for voltage and temperature input on

each channel. When using the voltage and temperature inputs

simultaneously, do not connect them both at the same time, as

this may damage the object you are measuring. (You cannot

measure the voltage and temperature simultaneously on the

same channel.)

5.11.1 Setting Voltage Measurement

Flashing cursor

Function

display

Meaning

Move the cursor up in the selection

window.

Move the cursor down in the selection

window.

5.11.2 Setting Temperature Measurement

Flashing cursor

Thermocouple Measurement input range Thermocouple Measurement input range

K -200 to 1350 N -200 to 1300

E -200 to 800 R 0 to 1700

J -200 to 1100 S 0 to 1700

T -200 to 400 B 300 to 1800

W 0 to 2000

5.11 Setting the 8954 VOLTAGE/TEMP UNIT

Procedure

Screen: LIST, ONE CH (CHANNEL)

1. Use the Menu keys to display the desired screen.

2. Move the flashing cursor to the

Mode

item to be

set.

3. Use the function keys to select

VOLTAGE

For details on other common settings, see Quick Start Section 6.3.