User Manual

118
────────────────────────────────────────────────────
5.9 Setting the 8952 DC/RMS UNIT
────────────────────────────────────────────────────
5.9.1 Setting Voltage Measurement
Function
display
Meaning
:
Move the cursor up in the selection
window.
:
Move the cursor down in the selection
window.
5.9.2 Setting RMS Measurement
5.9 Setting the 8952 DC/RMS UNIT
Procedure
Screen: LIST, ONE CH (CHANNEL)
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
Mode
item to be
set.
3. Use the function keys to select
DC
.
For details on other common settings, see Quick Start Section 6.3.
The input signal is converted to a true RMS value, then displayed.
Procedure
Screen: LIST, ONE CH (CHANNEL)
(1) Setting the measurement mode
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
Mode
item to be
set.
3. Use the function keys to select
RMS
.