User Manual

117
────────────────────────────────────────────────────
5.8 Setting the 8951 VOLTAGE/CURRENT UNIT
────────────────────────────────────────────────────
Flashing cursor
NOTE
Procedure
Screen: LIST, ONE CH (CHANNEL)
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
Mode
item to be
set.
3. Select the model name of the clamp-on sensor or
clamp-on probe to be used with the function
keys. Scaling is performed automatically.
For details on other common settings, see Quick Start Section 6.3.
When using a clamp-on sensor or clamp-on probe that is not listed is the
measurement mode list, measure using voltage mode and use scaling.
For details on how to set the scaling, see section 5.3.