User Manual

116
────────────────────────────────────────────────────
5.8 Setting the 8951 VOLTAGE/CURRENT UNIT
────────────────────────────────────────────────────
5.8.1 Setting Voltage Measurement
Flashing cursor
Function
display
Meaning
:
Move the cursor up in the selection
window.
:
Move the cursor down in the selection
window.
5.8.2 Setting Current Measurement
Conversion cable Clamp-on sensor/probe
- 3273, 3273-50, 3274, 3275, 3276
9318 9270, 9271, 9272, 9277, 9278, 9279
5.8 Setting the 8951 VOLTAGE/CURRENT UNIT
Procedure
Screen: LIST, ONE CH (CHANNEL)
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
Mode
item to be
set.
3. Use the function keys to select
VOLTAGE
.
For details on other common settings, see Quick Start Section 6.3.
The 8951 VOLTAGE/CURRENT UNIT can be connected to a clamp-on
sensor or clamp-on probe and used to measure current. Clamp-on sensors
and clamp-on probes that can be directly connected or connected using a
conversion cable are as follows. For details on connection methods, see
section 2.4.2.
For details on other common settings, see Quick Start Chapter 6.3.