User Manual

115
────────────────────────────────────────────────────
5.7 Setting the Probe Voltage Division Ratio
────────────────────────────────────────────────────
Function
display
Meaning
:
1:1 setting. Select this when using the
9197 or 9198 CONNECTION CORD on the
modules input terminal.
:
10:1 setting. Select this when using the
9665 10:1PROBE on the modules input
terminal.
:
100:1 setting. Select this when using the
9666 100:1PROBE on the modules input
terminal.
:
1000:1 setting. Select this when using the
9322 DIFFERENTIAL PROBE.
NOTE
Procedure
Screen: LIST (CHANNEL)
1. Press the
CHAN
key to display the List (Channel)
screen.
2. To display the optional settings screen, use the
F3
(
PAGE
)key.
3. Move the flashing cursor to the
Probe
item to be
set.
4. Use the function keys to make the selection.
1:1 is set as the factory default and when the system is reset.
For details on how to set the probe offset, see Quick Start Section 9.2.11.