User Manual

110
────────────────────────────────────────────────────
5.5 Copying Channel Settings
────────────────────────────────────────────────────
Flashing cursor
Function
display
Meaning
:
Increase channel number
:
Decrease channel number
:
Selects all channels.
:
Copies.
:
Closes the Copy screen.
NOTE
5.5 Copying Channel Settings
Copies any of input channel settings (voltage axis range, input coupling,
low-pass filter, and variable function), scaling function settings, or comment
function settings to another channel.
Copying channel settings cannot be carried out between different modules.
Procedure
Screen: LIST, SCALING, COMMENT (CHANNEL)
1. Press the
CHAN
key to display the copy settings
on the Channel screen (List screen, Scaling
screen, or Comments screen).
2. Move the flashing cursor to the number of the
channel to be used as copy source.
3. Press the
F4
(
copy
) key. The copy source and
copy destination are displayed in the small
window that appears.
4. Using the function keys or
JOG
control, select
the copy source channel.
5. When
set
is pressed, the settings of the copy
source channel are copied to the copy target
channel.
Magnification and the zero position are not copied.
Batch copying cannot be used with input channel settings, scaling, or
comments.