User Manual

105
────────────────────────────────────────────────────
5.3 Scaling Function (SYSTEM)
────────────────────────────────────────────────────
Setting the scaling function
Setting the variable function
Convert the measurement to a physical quantity.
Set the unit (eu).
Set the upper and lower limits of variable setting
using the converted (scaled) physical quantity.
Set the unit (eu) on the scaling setup screen.
1.
2.
The gauge unit indication [ ] is widened
(when the gauge is set to ON.)
[
V
]
50
45
40
35
[
VVVVVVVV
]
50
45
40
35
CH1 100 mV fs ( 5 mV x 1 )
CH1 -50 to 50 [mV ]
Before scalin
g
A
fter scalin
g
Before scalin
g
A
fter scalin
g
The input channel is represented in full-span mode instead of full-scale
mode, and the unit is displayed in [ ]
Combination of the scaling and variable functions
It is possible to combine the scaling and variable functions.
When using the scaling and variable functions together, it is necessary to set
the upper and lower limits of the physical amounts after first conversion
(after scaling). Perform this setting first for variables, then for scaling.
How to identify scaled data output