User Manual

104
────────────────────────────────────────────────────
5.3 Scaling Function (SYSTEM)
────────────────────────────────────────────────────
Flashing cursor
Function
display
Meaning
:
Displays the numerical value input screen.
:
Initializes the system.
:
Returns to the numerical values set one
step before.
Function
display
Meaning
:
Sets the selected numerical values.
:
Backspace
:
Deletes all the set numerical values.
:
Determines the numerical values that were
set and exits the numerical value input
screen.
Function
display
Meaning
:
Displays the text input screen.
:
Deletes all the set characters.
:
Returns to the values set one step before.
:
Initializes the system.
:
You can select from the list.
NOTE
(2) Entering the numerical value
1. Move the flashing cursor to the item to be set.
2. Use the function keys to make the selection.
3. Use the function key to enter the numerical
value.
Conversion ratio method (conversion ratio: eu/v,
offset)
The setting range: -9.9999E+9 to +9.9999E+9.
2-point method (voltage value: volts, values after
conversion: scale)
The setting range: -9.9999E+29 to +9.9999E+29.
(3) Enter the unit
The unit name can be up to 7 characters long.
1. Move the flashing cursor to
Unit
.
2. Select the
INPUT
function key.
3. Enter the unit name. Refer to the Section 5.4.
To exit from the character input screen or numerical input screen, press the
ESC
key.