Quick Start Guide

8
────────────────────────────────────────────────────
Display Screen and Setting Screen
────────────────────────────────────────────────────
In addition to the list page shown on the previous page, the channel screen includes the three
types of pages specified below. To change pages, press the menu key (
F1 F2
function keys)
or
CHAN
key.
Options page
Selection of the probe pressure-
distribution ratio when the 9665, 9666,
or 9322 is used
Setting of the antialiasing filter (enabled
when used with the 8953-10 unit)
Setting of details (reference contact,
burnout) for temperature measurement
when used with the 8954 unit
Setting of details (threshold, hold, level,
etc.) when used with the 8955 unit
ONE CH
These pages are used to enter settings for individual
channels. Since the page displays a level monitor and
numerical values, variable and scaling settings can be
entered while the input level is monitored.
SCALING
This page is used to enter scaling settings. It allows the
setting of scaling values for all channels. For details, refer to
5.3 "Scaling Function" in the Instruction Manual.
COMMENT
This page is used to enter comments. It allows the input of
comments for all channels (logic). For details, refer to 5.4
"Comment Function" in the Instruction Manual.