Quick Start Guide

6
────────────────────────────────────────────────────
Display Screen and Setting Screen
────────────────────────────────────────────────────
CH setting
F9
Input unit setting
The following settings can
be entered for each
channel:
Display ON/OFF
Voltage axis range
(vertical axis) setting
Zero-position setting
Display graph setting
Coupling setting
Magnification /
compression of the
vertical axis
Low-path-filter setting
Trigger setting
The following settings can
be entered for each
channel.
(Analog only)
Display ON/OFF
Trigger type setting
Trigger level setting
Trigger slope setting
For the setting of other
items, use the trigger
screen.
Comment display
Comments for each channel
can be displayed.
Comments cannot be input
in the waveform display
screen. To enter a
comment, press the CHAN
key to display the comment
setting screen.
Logic waveform display
Display settings for each
logic waveform can be
adjusted. The following
settings can be entered on
this screen:
Logic display ON/OFF
Display position
CH setting
F9
CH setting
F9
OFF
CH setting
F9
Back to the input
unit setting screen.
CH setting
F9