Quick Start Guide

25
────────────────────────────────────────────────────
Measurement Method
────────────────────────────────────────────────────
Press the
DISP
key to display the display screen.
Press the START
key to begin measurement.
When the
START
key is pressed, "Waitin g for trigger" is
displayed at the upper right corner of the screen.
When "Waiting for trigger" is displayed, apply an i mpact
to the subject board.
The trigger is activated, and "Storing" is displayed at the
upper right corner of the screen.
The measurement is completed in approximately one
second, and a waveform is displayed.
5. Starting measurement
Start measurement.
Display the display
screen.