Quick Start Guide

21
────────────────────────────────────────────────────
Measurement Method
────────────────────────────────────────────────────
Measurement of the sensor output
Use the 8953-10 HIGH RESOLUTION UNIT to measure the output of the acceleration sensor.
Observe the waveform of the effect caused by an impact applied to the subject board.
Connect the sensor output (output from the amp that magnifies the sensor output in this
example) to the input terminal of the 8953-10 HIGH RESOLUTION UNIT (CH1). The external
sensor amp used in the example has a full scale of
2 V. The external amp also produces an
output of 0 V at 0 G, and
2Vat 5G.
2. Connection
1. Method
Subject board
8855
CH1
Amp
(acceleration-sensor output amplifier)
Impact
Acceleration
sensor