Quick Start Guide

11
────────────────────────────────────────────────────
Display Screen and Setting Screen
────────────────────────────────────────────────────
System screen
The s ystem screen can be displayed by pressing the
SYSTEM
key located on the left side of the
unit.
To change pages, press the menu key (
F1 F2
function keys).
The system screen is used to enter settings common to all functions; settings for printer, files,
and communication ; 8855 initial se ttings; and self-diagnosis settings.
The following briefly describes each of these setting pages.
SET UP (Refer to 9.2 "Set Up Screen" in the Quick Start
Manual.)
Display settings (grid display, comment display, etc.)
Start condition settings (start backup, etc.)
External control terminal settings (GO. NG terminal, probe
correction output setting)
SCSI settings (ID setting, external MO setting, PC
connection setting)
FILE SAVE (Refer to 9.3 "File Screen" in the Quick Start
Manual.)
Auto-save settings (destination, file save format, saving
range, etc.)
Storage of numerical processing results (destination,
saving method)
SAVE key setting (saving operation performed when the
SAVE
key is pressed)
PRINTER (Refer to 9.4 "Printer Screen" in the Quick Start
Manual.)
Printer settings (Grid, density, gauge, marker, size, etc.)
Printing format settings
Comment printing settings
Printing destination setting (printer, LAN equipment)
Real-time print settings (recorder function, R&M)