User Manual

65
────────────────────────────────────────────────────
4.5 Settings on the Display Screen (MEM)
────────────────────────────────────────────────────
1
2
3
4
5
6
8
9
（Zoom function）
7
1
Function
MEM,REC,RMS,REC&MEM,FFT ･Select function.
2
Trigger mode
SINGLE,REPEAT,AUTO ･Select trigger mode.
3
Analog trigger
OFF,LEVEL,OUT,IN,V-DROP,
CYCLE
･Set the analog trigger.
4
Pre-trigger
0 to 100%, -95% ･Set the Pre-trigger.
5
Time Axis Range
100μs/DIV to 5 min/DIV, EX
T
･Set the time 1 scale (1 DIV).
6
Magnification
/compression
along the time ax
is
×10 to ×1/10000 ･By magnifying the waveform, detailed observations
can be made. By compressing the waveform, an
entire change can be promptly apprehended.
7
Zoom function
×1/5000∼10 ･Display screen into upper and lower windows, so
that the regular-size waveform is displayed in th
e
upper window and the waveform enlarged in the tim
e
axis direction is displayed in the lower window.
8
Recording
Length
SELECT：25 DIV to 5000 DIV
ARBITRARY：1 DIV to 5000 DI
V
･Using channels：32 ch
･Capacity：16 M words
･The length of recording for one
measurement operation (the number of
DIV) can be set.
9
Cursor
Measurement
OFF, , , ＋ ･The A/B cursors can be used.
Display size
NORMAL, WIDE ･The screen size can be changed by
pressing the DISP key.
Input channel
settings
・Analog input
・Logic input
・X, Y axis (X-Y format)
･Enables the measurement conditions for
each channel on the display screen to b
e
set or changed. See Section 9.9.
Input level monitor
function
Press the LEVEL MON. key. ･See Section 11.5.
VIEW function
Press the VIEW key. ･See Section 11.6.
4
.5 Settings on the Display Screen (MEM)
Explains the setting items on the Display screen.
For details on setting, refer to Section 4.3.
When want to use the JOG control, press the VALUE select key.（The selection window
is not displayed.)