User Manual

64
────────────────────────────────────────────────────
4.4 Using the X-Y Waveform Plots (MEM)
────────────────────────────────────────────────────
Screen: DISPLAY (excluding X-Y1 and X-Y4
)
Display the captured waveform data, using
a format other than X-Y1 and X-Y4.
Use the A/B cursors to specify the desired
portion for plotting, as shown in the figure
on the left (see Section 11.2).
Press the STATUS key to call up the
STATUS1 screen.
Carry out combined plotting as described
above.
In partial X-Y plot, the screen displays the
period of time passed after the completion
of the trigger specified using the cursors A
and B.
Method
Method
Partial X-Y plot
Using the A/B cursors, it is possible to specify a range for partial X-Y plotting.
(Normal X-Y plotting covers all data of the recording length.)