User Manual

62
────────────────────────────────────────────────────
4.4 Using the X-Y Waveform Plots (MEM)
────────────────────────────────────────────────────
Four single plot is displayed and recorded
.
A single plot is displayed and recorded.
･ The sampled data is displayed and
recorded just as it comes.
･ Linear interpolation is not performed.
･ Linear interpolation is performed.
･ The display becomes easier to read, but
display speed is slower compared to dot
display.
(1) 1 画面
(1) X-Y Single
(1) 1 画面
(2) X-Y Quad
(1) 1 画面
(3）X-Y（dot）
(1) 1 画面
（4）X-Y（line）
4
.4 Using the X-Y Waveform Plots (MEM)
・Setting the display format to X-Y in status screen allows X-Y waveforms to be
combined. Any of channels 1 to 32 can be selected for each of the X and Y
axis. Up to four X-Y plots can be made simultaneously.
・Voltage axis magnification/compression is active also when using X-Y
combined plotting.
・Using the A/B cursors, it is possible to specify the data between the cursors for
partial plotting.