User Manual

────────────────────────────────────────────────────

4.3 STATUS Settings (MEM)

────────────────────────────────────────────────────

.3.13 Setting the Waveform Evaluation

NOTE

・The Waveform Evaluation function can be used Memory recorder function

(single screen and X-Y single screen).

・GO (pass) or NG (fail) evaluation of the input signal waveform can be

performed using an evaluation area specified by the user.

・This can serve to detect irregular waveforms.

・After the evaluation result is generated, signals are output from the GO/NG

terminal.

・All the channels being displayed are evaluated.

・When the waveform judgment area is created using the memory recorder

function, waveform judgment using the FFT function is disabled.

・For details on the waveform evaluation, refer to Section 16.3.