User Manual

55
────────────────────────────────────────────────────
4.3 STATUS Settings (MEM)
────────────────────────────────────────────────────
4
.3.9 Setting the Auto Print Function
Screen: STATUS
1
Press the STATUS key to call up the
STATUS1 screen.
Move the flashing cursor to the auto print
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Auto print is disabled.
：Auto print is enabled.
Selection
Selection
Method
Method
：Print image data can only be
transferred to the 9333 LAN
COMMUNICATOR when using a
LAN card.
NOTE
When the function is enabled, printout is carried out automatically after a
measurement data is captured.
・When cursor A and B are enabled, partial printing is executed.
・When the roll mode is enabled and the time-axis range is lower than 10
ms/division, data is displayed and printed simultaneously.