User Manual

51
────────────────────────────────────────────────────
4.3 STATUS Settings (MEM)
────────────────────────────────────────────────────
4
.3.5 Setting the Display Size
Screen: STATUS
1
Press the STATUS key to call up the
STATUS1 screen.
Move the flashing cursor to the display size
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Normal size
：Wide size
Selection
Selection
Method
Method
NOTE
4
.3.6 Setting the Interpolation (dot-line)
Screen: STATUS
1
Press the STATUS key to call up the
STATUS1 screen.
Move the flashing cursor to the dot-line
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Linear interpolation is not
performed.
：Linear interpolation is performed.
Selection
Selection
Method
Method
The display size can change the normal size or the wide size.
The display size can be changed by pressing the DISP key on the display screen.
・Interpolation can be set when set the X-Y graph format.
・This setting determines whether the input waveform (sampling data) is to
be displayed and printed as a series of dots or a line using linear
interpolation.