User Manual

46
────────────────────────────────────────────────────
4.3 STATUS Settings (MEM)
────────────────────────────────────────────────────
4
.3.3 Setting the Recording Length
Screen: STATUS1, DISPLAY
Call up the STATUS1 or DISPLAY screen
.
Move the flashing cursor to the shot item,
as shown in the figure on the left.
Select the SELECT.
Use the JOG control or the function keys
to make the selection.
：Move the cursor up in the selection
window.
：Move the cursor down in the
selection window.
：Set the fixed recording length mode
.
Selection
Selection
Method
Method-1
Fixed recording length mod
e
：Set the any recording length mode.
Screen: STATUS1, DISPLAY
Call up the STATUS1 or DISPLAY screen
.
Move the flashing cursor to the shot item,
as shown in the figure on the left.
Select the ARBITRARY.
Use the JOG control or the function keys
to make the selection. Use the cursor keys
to change the column.
：Value up.
：Value down.
：Set the fixed recording length mode
.
Selection
Selection
Method
Method-2
Any recording length mod
e
：Set the any recording length mode.
・The length of recording for one measurement operation (number of DIV) can
be set.
SELECT： Select the recording length.
ARBITRARY：Any recording length can be selected by the user.