User Manual

8.7.7 Transfer Function [TRF] 182
8.7.8 Cross Power Spectrum [CSP]
184
8.7.9 Cross Correlation [CCR]
186
8.7.10 Unit Impulse Response [IMP]
187
8.7.11 Coherence [COH]
188
8.7.12 Octave Analysis [OCT]
190
Chapter 9 Input Channel Settings 193
9.1 Setting Items for Input Channel 193
9.2 Input Channel Setting Procedure 194
9.3 Setting the CHANNEL1 Screen 196
9.3.1 Setting the Waveform Display Color 197
9.3.2 Setting the Waveform Display Graph Position
198
9.3.3 Setting the Measurement Range
199
9.3.4 Setting the Input Coupling
200
9.3.5 Setting the Magnification/Compression Ratio Along the
Voltage Axis
201
9.3.6 Setting the Zero Position
202
9.3.7 Setting the Low-Pass Filter
204
9.3.8 Setting the Logic Inputs
205
9.4 Copying Channel Settings 207
9.5 Zero Setting
208
9.5.1 Zero Adjustment 208
9.5.2 Zero Offset
209
9.6 Setting the CHANNEL2 Screen 212
9.6.1 Setting the Variable Function 212
9.7 Scaling Function (SYSTEM2) 215
9.7.1 Setting the Scaling Function 216
9.7.2 Scaling Setting Example
220
9.8 Comment Function (SYSTEM 3) 221
9.8.1 Title Comment Input 221
9.8.2 Analog Channel Comment Input
222
9.8.3 Logic Channel Comment Input
224
9.8.4 Character Entry Procedure
226
9.9 Setting the Display Screen 228
9.9.1 Entering by CH.SET key 228
9.9.2 Vernier Function
229
9.9.3 Direct Channel Setting
230