User Manual

36
────────────────────────────────────────────────────
3.3 Other Keys Operation
────────────────────────────────────────────────────
MANU TRIG ke
y
When the unit is in trigger standby mode, pressing this
key causes manual triggering. See section 10.12.
CH. SET key Enables the measurement conditions for each channel
on the display screen to be set or changed.
The setup can be performed even during startup.
(However, it is disabled during parameter operation
setting.)
The setup screen for "ch 1 to 16," "ch 17 to 32," or
"logic A to H" can be selected on the channel and
trigger screens.
See Section 9.3.
LEVEL MON.
key
Displays the level monitor. See section 11.5.
VIEW key Shows at the bottom of the screen the position with
respect to the recording length of the displayed part of
the waveform.
Call up information about the status of memory block.
See Section 11.6.
FILE key Calls up the FILE screen. Serves to read and store
waveform data on the FILE screen. See Chapter 14.
HELP key An explanation of the display screen or the item
currently selected by the cursor appears.
Press the HELP key
Press any key
3
.3 Other Keys Operation
On-line Help
A brief explanation of the item currently selected by the flashing cursor is
displayed by pressing the HELP key.
Press any key to cancel the help screen.