User Manual

34
────────────────────────────────────────────────────
3.1 Basic Key Operation
────────────────────────────────────────────────────
3
.1.2 Printer Key Operation
PRINT key Serves to print out the waveform.
Output destination by the PRINT key can be selected.
See Section 12.5.2.
COPY key Produces a hard copy of the display content.
Copy destination by the COPY key can be selected.
See Section 12.5.1.
FEED key Forwards the paper while the key is held down.
3
.1.3 Setting Items
F1 to F5
(Function key)
The respective items are shown in the function
key display.
Select and set the items.
CURSOR keys
Serve to move the flashing cursor.
3
.1.4 JOG/SHUTTLE Control and Select Key
JOG control
SHUTTLE control
Lit LED JOG/SHUTTLE control function
Entering the numerical values.
Waveform scrolling
See section 11.1
Movement of A/B cursors
See section 11.2
Use the select key when the screen is in measurement display
mode. Selected key lights LED.
Entering numbers and setting items
GUI
Value up Move the item selection cursor up in the
selection window.
Value down Move the item selection cursor down in
the selection window.
Value up,
large step
Value up, 10-units
Value up, sma
ll
step
Value up, 1-units
Value down,
small step
Value down, 1-units
Value down,
large step
Value down, 10-units