User Manual

491
────────────────────────────────────────────────────
21.1 Error Messages
────────────────────────────────────────────────────
1
2
3
4
5
2
1
7
8
9
1
0
1
1
1
2
1
3
1
4
A
ERROR 1：Set printer paper. ・Printer paper has run out. Reload.
ERROR 2：Set printer lever． ・The head up/down lever has been left in the
up position. Lower it.
ERROR 11：Printer is not ready. ・External printer is not ready to printout.
Set the external printer.
ERROR 12：Set printer power on ・Check the external printer connection and
power on.
ERROR 13：Paper End ・Printer paper has run out. Reload.
ERROR 14：Printer Error. ・Check the built-in printer.
Chapter 2
1
Append
ix
2
1.1 Error Messages
The unit produces two levels of message to indicate problems. These are
distinguished as follows.
■ Error messages
・The "ERROR" indication appears at the bottom of the screen, followed by
the message. This remains until the cause of the error is removed, or the
STOP key is pressed.
・If the "beep sound" item on the system screen is set to ON, then the beeper
sounds intermittently while the message is displayed.
■ Error Message and explanation