User Manual

25
────────────────────────────────────────────────────
2.8 Loading Recording Paper
────────────────────────────────────────────────────
(5) Pull the end of the recording paper out at leas
t
10 cm, and make sure that it is positioned
quite straight.
(6) Put down the head up/down lever.
(7) Pull the recording paper to the outside
through the printer exit slot in the stock cover
.
(8) Close the stock cover, and finish by tearing of
f
the recording paper against the edge of the
printer exit slot.
NOTE
･ The paper may jam if it is not aligned with the roller.
･ Always place the product in the head-up condition when it is to be transported
or stored for an extended period of time. If the product is left idle for a long
time with the head pressing on the roller, the roller may be deformed,
resulting in uneven printing.
･ Printing is not possible if the recording paper is loaded wrong-side up.