User Manual

465
────────────────────────────────────────────────────
18.10 Others
────────────────────────────────────────────────────
Comment printing Function, channel, Input range, Zero position, Trigger time, DIV and
other information can be printed.
Comment input function Provided
Cursor measurement
function
Time difference, voltage difference or number of cycles between cursors A
and B, voltage at each cursor, time from trigger
Scaling function Specifiable for each channel
Display copy function Provided
List・gauge functions ON, OFF
Starting status backup
function
Provided
Auto setup function When the power is turned on, settings and a waveform evaluation area
stored on a floppy disk can be automatically loaded.
Auto save function Provided
Remote control Start, stop and print control terminals (threshold value: 2.5 V approx. ,
active low, or terminal short)
Auto-range function Provided, selects optimum time axis and measurement range for input
waveform
VIEW function ・Shows relative positions of displayed data within recording length and
to full-scale point.
・When memory segmentation is used, usage condition of each block is
shown.
On-line help An explanation of the display screen or the item currently selected by th
e
cursor appears.
Key lock function Locks all keys except the KEY LOCK key
LCD back lighting ON, OFF (with the auto OFF function)(auto OFF time can be selected 1
to
30 min)
List print function ・Settings output after waveform data print.
・Output by pressing the PRINT key other than on display screen.
Vernier function Provided
Direct channel setting Special keys allow range and position selection for direct input units.
Level monitor function Provided
1
8.10 Others