User Manual

457
────────────────────────────────────────────────────
18.2 External Data Storage and Interface
────────────────────────────────────────────────────
16
17
18
19
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
A
GP-IB ・Complies with IEEE 488.2-1987
・Remote control including input unit is possible.
・The optional 9558 GP-IB CARD is used.
RS-232C ・Complies with EIA RS-232C
・Remote control including input unit is possible.
・The optional 9557 RS-232C CARD is used.
LAN ・Complies with IEEE 802.3i (Ethernet 10BASE-T)
・Remote control including input unit is possible.
・The optional 9578 10BASE-T LAN CARD (option) is used.
・Commercially available LAN cards (specified) can be used.
・Using the 9333 LAN COMMUNICATOR, remote control and data
accumulation are possible.
Printer ・Complies with PC-AT centronics
・Using the external printer, color print can be printed.
・The optional 9559 PRINTER CARD is used.
SCSI ANSI X3.131-1986（SCSI level 2）
JIS X6051（SCSI level 2）
Driver/receiver Single - ended
Bus-parity Output data ・・・none
Input data ・・・none
Data transfer method Asynchronous
Terminator Provided (not removable)
Terminator power Provided
Initiator operation Provided
Target 3.5-inch MO disk
Address 0to7
Connector ・Connect to MO disk drive with SCSI cable
・Connector type：High density（pin-type）（D-Sub half-pitch 50 P）
MO disk drive Connect to MO disk drive with SCSI cable
Data stored Settings, waveform evaluation area, screen data,
measurement data (binary or text),
(Measurement data can be saved between cursors A and B.)
spacing data (text)
Interface
SCSI Interface