User Manual

21
────────────────────────────────────────────────────
2.4 Connection of the Input Unit
────────────────────────────────────────────────────
■Connecting a Charge-Output Type Acceleration
Sensor (CHARGE mode)
Use a cable with a plug to mate with the
miniature connector to connect the pickup sensor
to the unit in CHARGE mode (10-32 miniature
connection terminal).
(1) Insert the miniature connector plug into the
miniature connector on the unit, and turn it
clockwise until tight.
(2) To remove the miniature connector, turn the
plug counterclockwise.