User Manual

440
────────────────────────────────────────────────────
16.3 Waveform GO/NG Evaluation
────────────────────────────────────────────────────
erase Function key display: 1/3
：Serves to erase unwanted sections
.
Press the F4 [ erase ].
Use the CURSOR keys to move the mark to the start point of the sectio
n
to be erased.
Pressing accelerates the movement of the mark.
Press the F1 [ set ] key.
Press the
F2 [ cancel ] key. Cancel the immediately preceding set point.
Move the mark to erase the unwanted section.
Press the F5 [ exit ] key to terminate the erase mode.
storage Function key display: 2/3
：Loads a waveform already stored in memory into the editor
.
Press the F1 [ storage ].
The waveform that was displayed on the screen is loaded into the editor.
The imported waveform is shown in a different color from the original
setting.