User Manual

439
────────────────────────────────────────────────────
16.3 Waveform GO/NG Evaluation
────────────────────────────────────────────────────
line Function key display: 1/3
：Serves to draw a straight or polygonal line
.
Press the F3 [ line ].
Use the CURSOR keys to move the mark to the start point of the line.
Pressing accelerates the movement of the mark.
If the area is not completely enclosed, adjacent areas will also be filled in.
Press the F1 [ set ] key.
Move the mark. A line is drawn between the set point and the mark
.
Press the F1 [ set ] key again. The color of the line changes, and it is
fixed.
Press the
F2 [ cancel ] key. Cancel the immediately preceding set point.
Repeat steps and when wishing to draw a polygonal line.
Press the F5 [ exit ] key to terminate the line mode.