User Manual

437
────────────────────────────────────────────────────
16.3 Waveform GO/NG Evaluation
────────────────────────────────────────────────────
1
6.3.5 Editor Command Details
paint Function key display: 1/
3
：Fills in an enclosed area.
Press the F1 [ paint ].
Use the CURSOR keys to move the mark to the area to be filled in
.
Pressing accelerates the movement of the mark.
If the area is not completely enclosed, adjacent areas will also be filled in.
Press the F1 [ exec ] key. The area completely enclosed by lines is filled in
.
Press the F5 [ exit ] key to terminate the paint mode.